7750 with Inductive Slot Sensor
Inductive Slot Sensor
Inductive Slot Sensor alarm available for 7710, 7720, 7750 Series
All 7710, 7720 and 7750 Series flowmeters may be fitted with one inductive slot sensor.
Inductive sensors are 2-wire, DC low current devices and are designed to be used with a remote barrier/switch isolator capable of powering the sensor and providing the desired switching option(s). Barrier/switch isolators are available with 220 VAC, 110 VAC or 24 VDC supply voltage requirements, contain single pole, double throw (SPDT) relays, and are DIN rail mountable. (Only 24 VDC units are actually powered by the rail.) See barrier/switch isolator specifications for electrical connections and further details.
The operating temperature range for this sensor is -13° F to158° F (-25° C to 70° C).
Note: We can supply the isolator / barrier upon request, but the user must provide the power supply voltage.
5-25V DC (Switch Isolator)
Output Load Current
<=1 mA – Float Present
>= 3 mA (15 mA Max.) –Float Absent
2 Conductor, NAMUR, Pos = Brown, Neg.= Blue
Pepperl & Fuchs Slot Sensor Approvals:
UL: General Purpose
FM: Intrinsically Safe
CSA: Intrinsically Safe
CENELEC: Intrinsically Safe
Optional 4-20 mA Transmitter for 7710, 7720, 7750
To Convert the measured flow into a 4-20 mAdc signal, an angle of rotation transmitter is mounted to the indicator. This device is factory calibrated to ensure accuracy and should only be adjusted by King Instrument Company.
The proper and safe operation of the device requires that the specific listed below are not exceeded:
12 to 33Vdc
Maximum Current Consumption
-13° to 158° F ( -25° to 70° C)
4 to 20 mAdc
Influence From Bearing
Temperature Influence (ambient)
± 0.3% per degree C
Power Supply Influence
Load Resistance Influence
± 0.1% at R max.
Transmitter Layout Rear View
Zero: Potentiometer P1 for zero point
SPAN:Potentiometer P2 for measuring range and value
1:Zero point mark on transmitter housing
2:Zero point mark on transmitter shaft
S1: Switch for reversing rotation (Not Applicable)
2 - Wire Connection